2m 35x35mm White Large Surface Mounted Aluminium Profile Kit for up to 2x 12mm Led strips

Large size surface mounted extrusion for use in a wide range of applications including: cove lighting, general indoor illumination, trough lighting and many more.
Suitable to house up to two LED strips (each not wider than 12mm).
The track works as an excellent heat sink, providing optimum cooling of LED modules for long life and high reliability.

How to install:
Screw mounting bracket directly to surface (we suggest 2 per meter for most applications, 3 per meter when you have gravity working against it) and then push the track into the brackets. The bracket grabs on the outer fluted channels of the aluminium track.
Alternatively screw the aluminium base (most applications require 2 screws per meter) directly to the mounting surface, install your led strips inside the profile and finally push-in the diffused cover. We recommend the use of self tapper pan head screws or M4 countersunk screws.

The tracks can be shortened to the desired length. This is a bespoke service and charged additionally.

These are large size profiles and can provide suitable heat dissipation even for high wattage LED strips. If you are looking at getting a powerful light output from these profiles you can use 1 or 2 rows of these Osram 2000lumens/m strips in Warm White LEDTF2000SG1830 or Cool White LEDTF2000SG1840.

Need a less bright and more cost effective solution? Try the Osram 8.6W Basic Flex in 3000K Warm White (slightly cooler) LEDBF1000SG3830.

Included in the 2m KIT:
LEDAL32A2MW - 2M white aluminium extrusion
LEDAL32DC2M - 2M diffuse cover
LEDAL32EC - 1x White End Cap without hole
LEDAL32ECH - 1x White End Cap with hole for cable entry
LEDAL32MB - 4x Metallic mounting brackets

Other options available:
LEDAL32 - 1M anodized version (grey)
LEDAL32M2 - 2M anodized version (grey)
LEDAL32M3 - 3M anodized version (grey)
LEDAL32B - 1M Black powder coated version
LEDAL32M2B - 2M Black powder coated version
LEDAL32W - 1M White powder coated version

Features:
+ Aluminium anodized track for LED Flex or LED modules
+ Low weight
+ Easy and fast assembly and connection
+ Suitable for LED strips not wider than 12 mm

Advantages:
+ Excellent heat sink providing long life and reliability for LED
+ Easy installation of the LED Flex or modules
+ 1 year Warranty.

Application area:
+ Cove lighting;
+ General indoor lighting;
+ Trough lighting;
+ Anywhere LED Flex or an LED module needs extra support.

Specifications:
Height: 35 mm
Length: 2000 mm
Material: 6063 anodized aluminium
Warranty: 1 year
Width (External): 35 mm
Width (Internal): 31.1 mm
Cover material: Polycarbonate
Cover assembly method: Push in
Aluminium base finish: RAL9010 Pure White

LED shown in images for illustration purposes and is not included in profile